Cylinder volume: 9.0-285m3
Production capacity: 1.9-76.0t/h
Motor power: 7.5-160kw
Application areas: mainly used for drying various bulk materials in metallurgy and chemical industry, as well as drying various raw materials such as clay, coal, slag, iron powder, etc.
1. Fine discharge particle, better finished product particle, less powder, cheaper price.
2. Long lifespan of wearing parts.
3. Small footprint, easy operation, durable working hours, reliable performance, simple maintenance, simple structure.
The process system is designed so that material transfer from the grate to the kiln occurs when the material on the grate is sufficiently preheated to have the requisite indurate strength for subsequent processing in the rotary kiln A rotary kiln is a steel round shell with refractory lining that rotates
| Model | Max. Feeding Size (mm) |
Processing Capacity (t/h) |
Motor Power (kw) |
Obliquity of material trough (°) |
Trough size (mm) |
Dimensions (L×W×H)(mm) |
| GZD-650×2300 | 300 | 80-100 | 1.2×2 | 10-20 | 650×2300 | 2300×1360×780 |
| GZD-750×2500 | 350 | 100-130 | 1.5×2 | 10-20 | 750×2500 | 2500×1460×780 |
| GZD-850×3000 | 400 | 120-150 | 3×2 | 10-20 | 850×3000 | 3110×1800×1600 |
| GZD-1000×3600 | 500 | 150-200 | 3.7×2 | 10-20 | 1000×3600 | 3850×1950×1630 |
| GZD-1100×3600 | 580 | 240-300 | 3.7×2 | 10-20 | 1100×3600 | 3600×2050×1660 |
| GZD-1300×3600 | 650 | 450-600 | 7.5×2 | 10-20 | 1300×3600 | 3900×2350×1750 |
| GZD-1500×3600 | 1050 | 450-1000 | 7.5×2 | 10-20 | 1500×3600 | 3900×2000×1750 |
| GZD-2000×3600 | 1200 | 550-1000 | 10×2 | 10-20 | 2000×3600 | 3600×2000×1750 |
| GZD-2500×5000 | 1500 | 650-1500 | 18×2 | 10-20 | 2500×5000 | 5000×2500×1800 |
| ZSW-380×95 | 500 | 100-180 | 11 | 0-10 | 3800×960 | 3920×1640×1320 |
| ZSW-490×110 | 630 | 150-400 | 15 | 0-10 | 4900×1100 | 4980×1830×1320 |
| ZSW-490×130 | 750 | 400-700 | 22 | 0-10 | 4900×1300 | 4980×2580×2083 |
| ZSW-600×130 | 750 | 400-700 | 22 | 0-10 | 6000×1300 | 6082×2580×2083 |
| ZSW-600×150 | 800 | 500-900 | 30 | 0-10 | 6000×1300 | 6086×2662×1912 |
| ZSW-600×180 | 900 | 700-1300 | 45 | 0-10 | 6000×1500 | 6310×3262×2230 |
| ZSW-600×200 | 1200 | 800-1500 | 55 | 0-10 | 6000×2000 | 6310×3462×2230 |
| Model | Max. Feeding Size (mm) |
Processing Capacity (t/h) |
| GZD-650×2300 | 300 | 80-100 |
| GZD-750×2500 | 350 | 100-130 |
| GZD-850×3000 | 400 | 120-150 |
| GZD-1000×3600 | 500 | 150-200 |
| GZD-1100×3600 | 580 | 240-300 |
| GZD-1300×3600 | 650 | 450-600 |
| GZD-1500×3600 | 1050 | 450-1000 |
| GZD-2000×3600 | 1200 | 550-1000 |
| GZD-2500×5000 | 1500 | 650-1500 |
| ZSW-380×95 | 500 | 100-180 |
| ZSW-490×110 | 630 | 150-400 |
| ZSW-490×130 | 750 | 400-700 |
| ZSW-600×130 | 750 | 400-700 |
| ZSW-600×150 | 800 | 500-900 |
| ZSW-600×180 | 800 | 700-1300 |
| ZSW-600×200 | 1200 | 800-1500 |
Read a great howto guides on Rotary Kiln Alignment and Alignment of Rotary Kilns as well as this full instruction video By L D Michaud We can IMPROVE ALL PLANTS Mineral Processing Engineering LABORATORY Ore Testing 911Metallurgy Engineering
DetailsRotary kiln means Rotary calciner kiln commonly known as rotary kiln belonging to building materials equipment According to different materials Rotary kiln can be divided into cement kiln 8637165829912 xingkuangjx
DetailsModelling and optimization of a rotary kiln direct reduction process 55 Figure 3 Kiln temperature distribution for the base case The feed material bed enters the kiln at ambient temperature and rapidly heats up due to the hot gas in the freeboard
DetailsRotary kilns work by processing material in a rotating drum at high temperatures for a specified retention time to cause a physical change or chemical reaction in the material being processed The kiln is set at a slight slope to assist in moving material through the drum
DetailsRead a great howto guides on Rotary Kiln Alignment and Alignment of Rotary Kilns as well as this full instruction video By L D Michaud We can IMPROVE ALL PLANTS Mineral Processing Engineering LABORATORY Ore Testing 911Metallurgy Engineering
DetailsModelling and optimization of a rotary kiln direct reduction process 55 Figure 3 Kiln temperature distribution for the base case The feed material bed enters the kiln at ambient temperature and rapidly heats up due to the hot gas in the freeboard
DetailsThe process system is designed so that material transfer from the grate to the kiln occurs when the material on the grate is sufficiently preheated to have the requisite indurate strength for subsequent processing in the rotary kiln A rotary kiln is a steel round shell with refractory lining that rotates
DetailsRotary kiln means Rotary calciner kiln commonly known as rotary kiln belonging to building materials equipment According to different materials Rotary kiln can be divided into cement kiln 8637165829912 xingkuangjx
DetailsThe preprocessing step is the raw material of nickel laterite ground with carbon material and flux limestone mixed and then continuously input laterite nickel ore by rotary the rotary kiln the flow of hot gas from the combustion of the material and the coal is subjected to all the melting steps drying dehydration reduction and metal growth
DetailsThe second utilizes a rotary kiln simulator to simulate the thermal treatment of soils the processing of minerals and the recovery of energy from waste materials REI experience with rotary kilns includes Waste Cofiring in a Cement Kiln Tertiary Air Injection Designs for Cement Kilns Rotary Kiln Design for Improved Ore Processing
DetailsRotary Kiln Alignment The continuity of operation of a lime sludge kiln requires strict maintenance control The rotary kiln is among the largest type of moving machines made and is subjected to extreme temperatures power failures atmospheric conditions varying loads and other operating conditions which affect its wear and alignment
DetailsRotary kilns work by processing material in a rotating drum at high temperatures for a specified retention time to cause a physical change or chemical reaction in the material being processed The kiln is set at a slight slope to assist in moving material through the drum
DetailsSoda ash or sodium carbonate Na 2 CO 3 is a versatile alkali material critical in the production of a litany of products and detergents and chemicals to consumer products and water softeners this material can be found in many of the products we interact with throughout our daily lives
DetailsProduction Stalite STALITE Rotary Kiln Production After being crushed to an optimum size for processing the raw slate is fed into STALITEs patented preheater The preheater conditions the rock before entering the rotary kiln The preheater slowly heats the rock as it comes down to the kiln The kiln is fueled by coal that is pulverized and blown into the kiln
DetailsModelling and optimization of a rotary kiln direct reduction process 55 Figure 3 Kiln temperature distribution for the base case The feed material bed enters the kiln at ambient temperature and rapidly heats up due to the hot gas in the freeboard
DetailsUpgrading Phosphate Ores with Rotary Kilns In cases such as these a rotary kiln can offer an advanced thermal processing solution How Rotary Kilns are used in Upgrading Phosphate Ores Many techniques are available for upgrading phosphate ore with the approach or combination of approaches chosen based around the type of ore as well as the
DetailsRotary Kilnsrotating industrial drying ovensare used for a wide variety of applications including processing raw minerals and feedstocks as well as heattreating hazardous wastes They are particularly critical in the manufacture of Portland cement
DetailsThe second utilizes a rotary kiln simulator to simulate the thermal treatment of soils the processing of minerals and the recovery of energy from waste materials REI experience with rotary kilns includes Waste Cofiring in a Cement Kiln Tertiary Air Injection Designs for Cement Kilns Rotary Kiln Design for Improved Ore Processing
DetailsIron Ore Roasting Rotary Kiln for Sale Savona Equipment is your supplier for new used and rebuilt ore roasting rotary kiln There are two basic types of rotary kilns direct fired and indirect fired Rotary Kilns are a pyroprocessing device used to raise materials to a high temperature calcination in a continuous process Materials produced
DetailsDec 06 2019 · Unishine Mining Machinery can provide cement grinding plantcement rotary kilnlime kilnball millrotary dryeretc 24 Hours Online Service For You 86 15138497999 Email sales101
DetailsThe preprocessing step is the raw material of nickel laterite ground with carbon material and flux limestone mixed and then continuously input laterite nickel ore by rotary the rotary kiln the flow of hot gas from the combustion of the material and the coal is subjected to all the melting steps drying dehydration reduction and metal growth
DetailsWashington rotary kiln processing ore We are here for your questions anytime 247 welcome your consultation Get Price Sand Making Machine A special equipment for the production of construction sand and stone As a manufacturer of sandmaking equipment for 40 years we can provide you with a variety of models to choose from
DetailsRotary kilns have been a tradition at PSP Engineering since 1951 Since that time our company has supplied more than 200 rotary kilns to America Europe Asia and Africa for a wide range of industrial applications – the production of cement lime magnesite and ceramsite iron ore processing and in the paper and chemical industries
DetailsIron Ore Processing for the Blast Furnace includes diamond bit rotary drills hydraulic shovels and loaders water wagons production trucks and From this point the pellets are charged into the large rotary kiln where they are heathardened at 2400 degrees Fahrenheit
DetailsProduction Stalite STALITE Rotary Kiln Production After being crushed to an optimum size for processing the raw slate is fed into STALITEs patented preheater The preheater conditions the rock before entering the rotary kiln The preheater slowly heats the rock as it comes down to the kiln The kiln is fueled by coal that is pulverized and blown into the kiln
DetailsModelling and optimization of a rotary kiln direct reduction process 55 Figure 3 Kiln temperature distribution for the base case The feed material bed enters the kiln at ambient temperature and rapidly heats up due to the hot gas in the freeboard
DetailsDirect reduction of lowgrade iron ore pelleted with coal was investigated using a pilotscale rotary kiln The evolution of the iron minerals the strength of the pellets and the emission
DetailsA rotary calciner rotary kiln is used for a variety of thermal material processing applications Elan now offers contract or toll processing services with the use of our rotary kiln offering calcined clay calcined petroleum coke calcined gypsum calcined kaolin calcined bauxite calcined alumina
DetailsIron Ore Processing for the Blast Furnace includes diamond bit rotary drills hydraulic shovels and loaders water wagons production trucks and From this point the pellets are charged into the large rotary kiln where they are heathardened at 2400 degrees Fahrenheit
DetailsWashington rotary kiln processing ore We are here for your questions anytime 247 welcome your consultation Get Price Sand Making Machine A special equipment for the production of construction sand and stone As a manufacturer of sandmaking equipment for 40 years we can provide you with a variety of models to choose from
Details
Email
OnlineChat
Message
